ECO-FRIENDLY SCREEN CHEMICAL
Superactive eco-friendly degreasing agent for new and used screens. Meshprep will remove all oils and
greases from the screen and dramatically improve the adhesion of the films to the screen. To use, wet the
mounted bolting cloth (screen), apply few drops of MESHPREP evenly and rub with the nylon soft brush to
evenly roughen the mesh as well as to remove the dirt and the grease particles and wash immediately. This
is non—corrosive and can be applied to all type of screens. It is very friendly with the finger and the mesh and
no blockage in the bolting cloth.
DIAZO SENSITIZER :
Eco-friendly. highly effective, superfast sensitizer for direct unsensitized emulsions with good self—|ife which
will give sharp image and water resistant quality in Direct/ Indirect films (Fotoline) and any unsensitized
Orange coloured fine powered sensitizer for all unsensitized screen emulsions, mix 3g with 100g of unsensitized
screen emulsion. Available in small 3gm pouches.
Eco-friendly, economical, concentrated power type emulsion removerfor Direct/indirect stencil films (Fotoline),
unsensitized / pre-sensitized coating emulsion, photopolymer capillary films (Fotofix), indirect pre-sensitized
stencil film (Fotostar) & photopolymer emulsions. To use, dissolve the 5 grams decoat power in 500 ml water
& apply over the screen and rub with the soft nylon brush and clean with force water. For fresh stencil
exposure, rinse with Meshprep (Degreaser).
Eco-friendly, economical decoating solution for Direct / Indirect stencil films (Fotoline), unsensitized / pre-
sensitized coating emulsion, photopolymer capillary films (Fotofix), indirect pre-sensitized stencil film (Fotostar)
and photopolymer emulsions. To use, wet the screen apply STD-10 chemical both the sides and rub with soft
nylon brush and clean with force water and for fresh stencil exposure, rinse with Meshprep (Degreaser)
TEXHARD - 93 :
A single component screen hardening solution for all types of stencil materials like Direct / Indirect stencil
films (Fotoline), photopolymer capillary films (Fotofix), photopolymer emulsions (Fotopolycoat, Fototexcoat)
and ordinary unsensitized emulsions (Polyblue, Chromoline, Silkote-63, Fledstar) etc. Texhard-93 is directly
applied to the final corrected screen and allowed to dry slowly. The dried screen is then washed in cold water.
These hardened screens are water resistant and are useful for printing with water based inks. The hardened
films are resistant to reclaiming solutions. It can also be used for printing multi colours in one screen with
PVC, Gloss. Matt Inks by blocking unwanted areas with Silkote-63 and re-open with water without damaging
the sharpness of the stencil.
HYDROGEN PEROXIDE :
20% volume activator for all indirect stencil films (Fotostar), also used as a developer in Standard pre-sensitized
emulsions (5 Star, Chromoline PS, SR, Chromoline PS, WFl) for dilution, mix 1 part with 4 parts of water.
Available in 450 ml bottle.